Kyocera 300 Module

Dual mode/tri-band capable - (CDMA 800 MHz/1900 MHz and GPS 1575.42 MHz)
RF sensitivity: - 106.5 dBm,+/-0.5 dBm (conducted)
Max output: +24 dBm, +/-0.5 dBm (conducted)
Programmable GPIOs including Hardware Wakeup and Dedicated Reset features
Support for Lithium-Ion Battery, charging and guaging
Voltage supply range - VEXT(4.2-5.5v), VBUS(5v), and VBAT(3.6-4.2v)
Over-voltage protection
Power consumption - Sleep <2mA, Idle ~ 100 mA, Traffic ~ 800 mA

IS-2000 (CDMA2000 Release 0) MOB_P_REV 6
IS-95A/IS-95B (JSTD-008) backward compatibility (MOB_P_REV1,3,4,5)
TIA/EIA-98E minimum RF performance
TIA/EIA-637A; two-way SMS
TIA/EIA-683A; OTASP and OTAPA
TIA/EIA-707A; data service options, Packet Data and CSD
TIA/EIA-835C; (TCP/IP/PPP) Simple IP and Mobile IP
NMEA 0183 v3.01 (IEC 61162-1)
TTY/TDD including operations in support of Telecommunications Act, Section 255

Separate Hirose UFL-R-SMT (50 ohm) Antenna Connectors for improved CDMA/GPS performance
Molex 80-Pin SlimStack™ Board-to-Board (B2B) connector
Serial-UART 1 and UART 2
Digital control and GPIOs - ADC, PDM
USB 2.0 OTG, WHQL certified driver supports 3 virtual parts
Power
Ground

FCC and IC
CDG1 and 2
CCF compliant
RoHS compliant
CDMA carrier approvals

* For a list of current and pending approvals, please contact module-sales@kyocera-wireless.com

Operational temperature range -20° to +60°C
Functional temperature range: -30° to +85°C**
Storage temperature range: -40° to +105°C

** The module is designed to be fully compliant to TIA/EIA-98E RF performance guidelines throughout the operational temperature range. Additional improvements have been made to provide on extended functional temperature range in which the module can operate with certain degradation of RF performance.